Thermal mass flow meters to measure Gas
Thermal dispersion mass flow meter is a perfect selection for a range of gas flow measuring, like combustion gas, flue gas, compressed air ，LPG .etc. Silver Automation Instruments offer qualified thermal dispersion flowmeter with low-cost value and fast delivery time. Below we have a tendency to list one typical gas measurement application of cold blast by
SRK-100 Thermal Mass Flow Meter For Sale | China Manufacturer
.
Air Flow Meter from China
gas flow meter manufacture request:
We need a gas flow sensor for cold blast air measuring. Cold blast air is delivered to furnace by turbo blower plant. We’d like a awfully reliable and high-accuracy flow sensor probe to cross check different 2 existing flow measuring instruments put in at same pipe line. These flow meters area unit previous and porta sort flow meter, we do not wish to exchange them however we'd like to put in a replacement flow meter for better accurate gas flow measurements.
Kindly realize below and quote best suited flow meter. We’d like flow meter with Press & Temp compensation to obtain accurate measuring result.
Flow Meter Technical Specifications
|
A |
Flow Instruments Process Conditions |
|||
|
A-1 |
Gas type: |
Cold Blast Air |
||
|
A-2 |
Flow rate (M3/min) |
Min |
Normal |
Max |
|
|
|
30,000 m³/h |
60,000 m³/h |
120,000 m³/h |
|
A-3 |
Pipe line Pressure (Psi) |
Min |
Normal |
Max |
|
|
|
1.5 Bar |
17 |
38 |
|
A-4 |
Temperature ℉ |
Min |
Normal |
Max |
|
|
|
140 |
150 |
392 |
|
B-1 |
Where to install |
Outdoor |
||
|
B-2 |
Pipe Diameter (mm) |
Internal |
Outer |
|
|
|
|
1410 mm |
1420 mm |
|
|
B-3 |
Pipe Material |
Mild steel |
Stainless steel |
Other |
|
|
|
|
|
ST-20 |
|
B-4 |
Pipe Thickness (mm) |
5 mm |
||
|
B-5 |
Insulation thickness (mm) |
|||
|
B-5 |
Flow rate type |
Volumetric |
||
|
B-6 |
Accuracy |
+/- 1 % |
||
|
B-7 |
Correction |
With Pressure and Temperature Correction |
||
|
B-8 |
Flow meter install direction |
Horizontal |
||
|
B-9 |
Flow Direction |
Unidirectional |
||
|
B-10 |
Straight Pipe length |
Down |
Up |
|
|
|
|
20D |
20D |
|
|
C |
Others |
|||
|
C-1 |
Power |
220 VAC/ 36 VDC |
||
|
C-2 |
Digtal display |
Remote |
||
|
C-3 |
Local Display |
Not needed |
||
|
C-4 |
Air flow Totalized |
need |
||
|
C-5 |
Analog output |
4-20Ma |
||
Reply to the Flow meter Enquiry:
Hi, thanks for your inquiry, when analyzing your Cold Blast Air flow meter technical specifications, we elect thermal dispersion mass flow meter; this flow meter will have perfect accuracy as you needed, and therefore the better part is that it will directly detect gas mass flow while not external T&P compensation. we have a tendency to notice your pipe line is actually giant, thermal mass flow meter will have plug-in installation which can prevent much installation work. Our instruments engineer calculates your specifications and thinks 1000mm size insertion thermal mass flow sensor is appropriate pipe size for your flow measuring application. Beside thermal dispersion mass flow meter has display for your observant the worth within the field handily conjointly simple for your future parameter configuration.
Here is the correct model selection from silver automation instruemnts
SRK-100/1400/FPI/TW/6/A0/T3/P1/D/1/E
SRK-100 Series Thermal Mass Flow meter
1400-Gas sensor Size DN1400
FPI-Remote Type reading & plug-in TW-Thread & weld base
6- detector Material 316 stainless-steel
A0-No Explosive Proof
T3- Temperature: 150~200℃
P1- Pressure: 0-1.0Mpa
D-Power S: 220VAC
1- Gas flow detector Output: 4-20mA
E-with display.
